Bosch WAN2823BSN, User Manual And Installation Instructions

Page: 35 / 60

Basic operation
en
35
2.
Insert the measuring aid.
3.
Insert the detergent drawer.
Adding detergent and care
product
Notes
¡
Please read the information in the
"Safety" →
Page 4 and "Preventing
material damage" → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement:
Find out the optimum
dosage for "detergent and care
product." →
Page 32
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 20
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press ⁠ .
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: "End".
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
1.
Press ⁠ .
2.
Press ⁠ repeatedly until the dis-
play indicates the desired "Ready
in" time.
3.
Press ⁠ .
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
⁠ .
3.
To resume the programme, after
the desired soaking time, press
⁠ .