en
Installation and connection
14
2.
Unscrew and remove all the
screws for the 4 transit bolts with a
WAF 13 wrench.
3.
Remove the power cable from the
holder.
4.
Remove the 4 sleeves.
5.
Put on the 4 cover caps.
6.
Push the 4 cover caps downwards.
Note:
To install the transport locks to
transport the appliance, perform
these steps again in the reverse or-
der.
4.5 Connecting the appliance
Connecting the water inlet hose
1.
Connect the water inlet hose.
Summary of Contents for WAN28206GR
Page 51: ......