![Bosch WAN24058IT User Manual And Installation Instructions Download Page 34](http://html.mh-extra.com/html/bosch/wan24058it/wan24058it_user-manual-and-installation-instructions_52048034.webp)
en
Basic operation
34
2.
Press
Fine fra
repeatedly until the
display indicates the desired
"Ready in" time.
3.
Press
Avvio / Agg. bucato
.
13.9 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Avvio /
Agg. bucato
.
3.
To resume the programme, after
the desired soaking time, press
Avvio / Agg. bucato
.
13.10 Adding laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
Avvio / Agg. bucato
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Avvio / Agg. bucato
.
13.11 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
Avvio / Agg. bucato
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Risciacquo
programme.
– If the water level is high: Start
the
Centrifuga
or
Scarico ac-
qua
programme.
3.
Remove the laundry.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Set the
Centrifuga
or
Scarico ac-
qua
programme.
2.
Press
Avvio / Agg. bucato
.
13.13 Unloading the laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Open the door.
2.
Remove the laundry.