en
Cleaning and maintenance
34
b) If the measuring aid
*
for liquid
detergent is used, pull it upwards.
3.
Clean the detergent drawer and
insert with water and a brush, and
dry it. Clean the inside of the
housing as well.
4.
Fit the insert and lock it into place.
a) Push the cylinder onto the guide
pin.
b) If the measuring aid* for liquid
detergent is used, slide it
forwards, fold down and click into
place.
5.
Push in the detergent drawer.
Note:
Leave the detergent drawer open
so that any residual water can
evaporate.
Drain pump is blocked
:
Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down.
After the water has cooled down:
1.
Turn off the water tap so that no
more water can flow in and has to be
drained via the drain pump.
2.
Switch off the appliance. Disconnect
the mains plug.
3.
Open and remove the service flap.
* depending on the model
Summary of Contents for WAN series
Page 1: ...en Instruction Manual and Installation Instructions Washing machine WAN ...
Page 42: ...6 ...
Page 43: ...6 ...
