en
Positioning and connecting
32
5
Positioning and
connecting
Positioning and connecting
Included with the appliance
Note:
Check the machine for transport
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from whom
you purchased the appliance, or our
after-sales service.
In addition,
a hose clamp ( 24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■
Spirit level for levelling
■
Wrench with:
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet
Safety instructions
:
Warning
Risk of injury!
■
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■
When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
(
Mains cable
0
Bag:
■
Installation and operating instructions
■
After-sales service location directory*
■
Warranty*
■
Cover caps for openings left after
removing the transport locks
■
Wrench
*
8
Water supply hose on Aqua-Stop models
@
Water drain hose
H
Elbow for securing the water drain hose*
#
3
+
P
Water supply hose on standard/Aqua-
Secure models
*depending on the model
