Additional programme settings
en
17
Ready in time (Ready in)
When you select the programme, the
relevant programme duration is displayed.
The programme duration is automatically
adjusted when the programme is running.
Changes to the programme default
settings or programme settings also
change the programme duration.
Before starting the programme, the
programme end ("Ready in" time) can be
preselected in increments of one hour (h =
hours) up to a maximum of 24 hours.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Note:
The programme duration is
included in the selected "Ready in" time.
After the start, the preselected time e.g.
8
h
is displayed and the time counts down
to the start of the wash programme. The
programme duration is then displayed,
e.g.
2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
1.
Press Start/
Reload
A
2.
Press the
"Ready in"
button
repeatedly until the required number
of hours is displayed.
3.
Press the
Start
/Reload
A
button.
Adding laundry while the preselected
time continues running:
1.
Press Start/
Reload
A
2.
The symbols
YES
and
¼
light up on
the display panel. The washing
machine door can be opened and
laundry can be added.
3.
Close the washing machine door.
4.
Press the
Start
/Reload
A
button.
The preselected time continues to
run.
\
Additional programme
settings
Additional programme settings
SpeedPerfect
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note:
Do not exceed the maximum
load.
Overview of programmes
EcoPerfect
For saving energy with a washing result
comparable to that of the standard
programme.
Bügelleicht
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
