Bosch WAJ240L8SN, User Manual And Installation Instructions

Page: 33 / 56

Basic operation
en
33
3.
Insert the detergent drawer.
Adding detergent and care
product
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement:
Find out the optimum
dosage for detergent and care
product. →
Page 30
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 20
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press .
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
3.
To resume the programme, after
the desired soaking time, press
.
Adding laundry
Note:
Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
1.
Press .
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→
"Display", Page 21
2.
Add or remove laundry.
3.
Close the door.
4.
Press .