Bosch WAJ240L8SN Page 32 User Manual And Installation Instructions Download

Page: 32 / 56

Basic operation

If necessary, adjust the pro-
gramme settings →

Page 32

Adjusting the programme set-
tings

Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.

Note:

Overview of all programme set-

tings:
→

"Buttons", Page 23

Requirement:

A programme has

been set.

▶

Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.

Loading laundry

Notes

Please read the information in the
Safety →

sec-

tions to ensure that you use the
appliance safely.

To prevent creasing, take note of
the maximum load for the relevant
programme →

Page 24

Requirement:

Prepare and sort the

laundry.
→

"Laundry", Page 28

Open the door.

Ensure that the drum is empty.

Separate the laundry and place it
in the drum.

Note:

Ensure that there is no laun-

dry trapped in the door.
Close the door.

Using a measuring aid for liquid
detergent

If you order the measuring aid as an
accessory, you must use the measur-
ing aid.

Press down on the insert and re-
move the detergent drawer.

Insert the measuring aid.

Summary of Contents for WAJ240L8SN

























































Search results

Summary of Contents for WAJ240L8SN

Reviews:

Related manuals for WAJ240L8SN

Brands by name

Popular brands

Bosch WAJ240L8SN, User Manual And Installation Instructions

Search results

Summary of Contents for WAJ240L8SN

Reviews:

Related manuals for WAJ240L8SN

Brands by name

Popular brands