en
Basic operation
32
3.
Insert the detergent drawer.
Adding detergent and care
product
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
Requirement:
Find out the optimum
dosage for detergent and care
product. →
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Inicioº/ Pausa + Carga
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: "End" .
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The soaking solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Inicioº/
Pausa + Carga
.
3.
To resume the programme, after
the desired soaking time, press
Inicioº/ Pausa + Carga
.
Adding laundry
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
1.
Press
Inicioº/ Pausa + Carga
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Inicioº/ Pausa + Carga
.
