Positioning and connecting
en
35
Transportation
E.g. when moving house
Preparatory work:
1.
Turn off the water tap.
2.
Reduce the water pressure in the
supply hose.
Maintenance – filter in the water
supply
3.
Drain the remaining detergent
solution.
Maintenance – detergent solution
pump blocked
4.
Disconnect the washing machine
from the mains.
5.
Remove the hoses.
Installing the transport locks:
1.
Remove the covers and keep them
in a safe place.
Use a screwdriver if necessary.
2.
Insert all 4 sleeves.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before commissioning:
Notes
■
The transport locks
must
be
removed.
■
To prevent unused detergent from
flowing straight into the drain during
the next wash: Pour approx. 1 litre of
water into compartment
II
and start
the
Drain
programme.
