VIP X1/VIP X2
| Installation and User Guide
EN
| 45
Bosch Security Systems | 2005-05 | V1.0
Configuration using a Web Browser
COM1 settings
You can configure the parameters of the
RS232/485
serial interface to meet
your requirements.
Note
If the VIP X is working in multicast mode (see page 43), the first remote
location to establish a video connection to the unit is also assigned the
transparent data connection. However after about 15 seconds of inactivity,
the data connection is automatically terminated and another remote
location can exchange transparent data with the unit.
Serial port function:
Select a controllable device from the list. If you want to use the interface to
transmit transparent data, select
Transparent
. To operate the unit with a
terminal, choose
Terminal
.
Note
After selecting a device, the remaining parameters in the window are set
automatically and should not be changed.
Baud rate:
Select the value for the transmission rate in Bit/s.
Data bits:
The number of data bits per character cannot be changed.
