Installation and User Guide |
VIP X1/VIP X2
EN
| 44
Configuration using a Web Browser
Bosch Security Systems | 2005-05 | V1.0
Multicast address video 1 / Multicast address video 2:
Enter a valid multicast address for each stream from the relevant encoder (video
input) to be operated in multicast mode (duplication of the data streams in the
network).
With the setting
0.0.0.0
the encoder for the relevant stream operates in multi-
unicast mode (copying of data streams in unit). The VIP X supports multi-unicast
connections for up to five simultaneously connected receivers.
Note
Duplication of data places a heavy demand on the CPU and can lead to
impairment of the image quality under certain circumstances.
Port:
If there are simultaneous data streams at the same multicast address, you must
assign different ports to each data stream.
Enter the port address for the relevant stream here.
Streaming:
Click in the checkbox to activate multicast streaming mode for the relevant
stream. An activated stream is marked with a check.
Multicast packet TTL:
A value can be entered to specify how long the multicast data packets are active
on the network. If multicast is to be run via a router the value must be greater
than 1.
