Installation and User Guide |
VIP X1/VIP X2
EN
| 36
Configuration using a Web Browser
Bosch Security Systems | 2005-05 | V1.0
Note
Proper password protection is only guaranteed if all higher authorization
levels are also protected with a password. For example, if a
live
password
is assigned, a
service
and a
user
password should also be set. When
assigning passwords, you should always start from the highest
authorization level.
User name:
The VIP X recognizes three user names:
service
,
user
and
live
, which
correspond to different authorization levels.
The user name
service
represents the highest authorisation level. After entering
the corresponding password, you can use it to access all the functions of the
VIP X and change all configuration settings.
The user name
user
represents the middle authorisation level. You can use it to
operate the unit and also to control cameras, but you cannot change the
configuration.
The user name
live
represents the lowest authorization level. It can only be used
to view the live video image and switch between the different live image
displays.
Password:
You can define and change a separate password for each user name if you are
logged on as
service
or if the unit is not protected by a password.
Enter the password for the selected user name here.
Confirm password:
Re-enter the new password to rule out typing mistakes.
Note
The new password is not saved until you click the
Set
button. You should
therefore click the
Set
button immediately after entering and confirming
the password, even if you also want to assign a password to another user
name.
