background image

Bosch Security Systems | 2003-08 | Version 2

EN

 | 1

VCM7D130/00T & VC7D1305T

 | Installation Instructions

IMPORTANT SAFEGUARDS

EN

Installation Instructions

ENGLISH

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturerís instructions.
8. Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

9. Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused 

for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such 
as power-supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has 
been dropped.

13. To reduce the risk of fire or electric shock, do not expose this 

apparatus to rain or moisture.

14. The apparatus shall not be exposed to dripping or splashing.
15. Do not install this equipment in a confined space such as a 

bookcase or similar unit.

Summary of Contents for VC7D1305T










Reviews: