en
Rails
16
p
Rails
Rails
Detaching the shelf supports
The shelf supports are each fixed to the side panels of
the cooking compartment at three points.
1.
Grip the front of the shelf support and pull it round to
the middle of the cooking compartment.
The front hook of the shelf support will come out of
the hole.
2.
Swing the shelf support round further and pull it out
of the rear holes in the side panel.
3.
Remove the shelf supports from the cooking
compartment.
Refitting the shelf supports
1.
Insert the hooks of the shelf support into the rear
holes in the side panel.
2.
Push the front hook of the shelf support into the
hole.
q
Appliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the oven door.
Removing the door panels
1.
Open the oven door fully.
2.
Lock the two hinges on the left and right using the
locking pin.
Note:
The locking pins must be fully inserted into the
holes in the hinges.
3.
Lift the bottom of the inner panel slightly until the
fastening pins come out of the holder (
1
).
4.
Carefully lift the top of the inner panel until the
fastening pins come out of the holder (
2
).
5.
Remove the inner panel.
Clean the panels with glass cleaner and a soft cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
D
E
Summary of Contents for VBC514CR0
Page 2: ......
