24 Operation and Maintenance
Ascend
Bosch Security Systems, Inc.
Technical Manual
F.01U.196.221
Rev. 08
Configure the Speaker Volume
Speaker Volume
is configured using dip switch settings located on the main board of the headset. The switch bank is located
on the boom mic module and the listen only module.
To
access the dip switches
, do the following:
NOTE:
Dip switches are located on the boom mic module and the listen only module. This feature is not available
on the audio input module.
>
Locate the
dip switch window
on the back of either the boom mic module or the listen only module.
Dip Switch Settings
NOTE:
The two (2) right-most switches are used to configure speaker volume.
TABLE 1.
Speaker Volume Dip Switch Settings
Dip Switch
Description
Intensified
Volume
Normal Volume
