1 987 AT7 374
2015-09-02
|
Robert Bosch GmbH
6 | TCE 260 | Outline
4.
Decompression system
Decompression system
Decompression tool
Bead breaker blade
Fixed style
Manual
Enter style
Manual
Max. working size
340mm
Bead breaker
blade pressure
2500KG
5.
Power
Power
Single phase
220V/110V-1.1kW 50Hz/60 Hz
Three phase
380V-0.75 kW 50Hz
Air supply pressure
8-10bar
6.
Noise< 70dB
1.3
Application range
The equipment is pneumatic/electic tyre changer. The
workable range (weight/size) please refer to the Chap-
ter of Technical parameter.
R
Applicable tire types:
$
Tire standard tire
$
Reverse tire
$
Tire without center hole
$
Run flat tire (with assist arm)
Warning: Each type of tire has its professional
operation method.
R
Notice: When demount/mount the tire of the old car(
exceeding 30 years)/modified car tires/ tire with the
rim modified, it may cause the accident.
1.4
Machine diagram
Warning
Understand all the information related to the machi-
ne; understand how to prevent the appearance of the
accident; understand how to use the tire changer;
understand all the function; understand the entire con-
trol key; understand each operation process to avoid
accident.
The installation of the machine must be correct: opera-
tion correctly and also execute the maintenance perio-
dically.
R
Equipment structure
1-Hexagon shaft: fixed demounting head
2-Cover: dust prevention
3-Cross arm locking control valve: locking/unlock swing arm and
horizontal arm
4-Demounting head: the tool for demounting/mounting the tire
5-Clamp jaw: clamping the rim
6-Turntable: fixed the tire
7-Pedal control system
7-1Swing arm control pedal: control swing of the horizontal arm
7-2Clamping jaw control pedal: control open/close of the clam-
ping jaw
7-3Blade control pedal: control the blade movement
7-4Turntable rotation control peda: control the rotation of the
turntable
8-Bead breaker blade: decompress the rim of tire
9-Shovel arm: support bead breaker blade
10-Grease container breaker: convenient to install different grea-
se container
11-Column: support horizontal arm
12-PCL Inflation gun: inflating for the tire
13-Air treatment assembly
13-1Pressure reducing valve: adjust the air supply pressure
13-2Water separator: separate the water
13-3Atomized lubricator: provide oil for the air route
en
