Basic settings
en
35
Setting Extra Dry
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press
repeatedly until
and
flash in the display.
4.
Press
repeatedly until the
LEDs show the right value.
If "LED A" →
tra Dry is switched off.
If "LED A" →
Dry is switched on.
5.
To save the settings, press
for 3 seconds.
Setting signal volume
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press
repeatedly until
and flash in the display.
4.
Press
repeatedly until the
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 ("LED
A and LED B" →
).
5.
To save the settings, press
for 3 seconds.
Set Wi-Fi
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press
repeatedly until
and flash in the display.
4.
Press
repeatedly until the
LEDs show the right value.
is not lit, the
wireless network connection is
switched off.
If "LED A" →
is lit, the
wireless network connection is
switched on.
5.
To save the settings, press
for 3 seconds.
Activating Remote Start
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press
repeatedly until
flashes on the display.
4.
Press
repeatedly until the
LEDs show the right value.
If LED A lights up, the function is
permanently deactivated.
If LED A and LED B light up, the
function can be selected using the
button.
If LED A, LED B and LED C light
up, the function is permanently ac-
tivated.
The factory setting is level 2 ("LED
A and LED B" →
).
5.
To save the settings, press
for 3 seconds.
Restoring factory settings
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press
repeatedly until
,
and flash in the display.
4.
Press
to set the appliance
back to the factory settings.
a
The appliance is reset.
