background image

en 

Before using for the first time

22

1.

Push the lever forwards   and fold
down the prongs  ⁠.

1

2

2.

To use the prongs again, fold them
back up.

a

The prongs audibly click into posi-
tion.

Knife shelf

Use the shelf for knives and long
items of cutlery.

Basket heights

Set the baskets at the right height.

Appliance height 81.5 cm with cutlery basket

Level

Top basket

Bottom basket

1 max. ø

22 cm

30 cm/"31 cm" 

→ 

Page 20

2 max. ø

24.5 cm

27.5 cm

3 max. ø

27 cm

25 cm

Before using for the first time

Before using for the
first time

Before using for the first time

Performing the initial config-
uration

On initial start-up or after a reset to
the factory settings, you will need to
make settings.

Requirement:

 "The appliance has

been installed and connected."
→ 

Page 11

1.

"Add special salt." → 

Page 24

2.

"Add rinse aid." → 

Page 25

3.

"Switch on the appliance."
→ 

Page 31

4.

"Setting the water softening sys-
tem." → 

Page 23

5.

"Set the amount of rinse aid to be
dispensed." → 

Page 26

6.

"Add detergent" → 

Page 26

.

7.

Start the Programme with the
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.

Summary of Contents for SRV4HKX53E

























































Reviews: