background image

en 

Programmes

18

Programme:

Use

Programme sequence

Additional func-
tions

NightProgram

Tableware:

¡

Cleaning mixed table-
ware and cutlery.

Level of soiling:

¡

Removing common
household food remnants
lightly dried-on.

Reduced noise:

¡

Pre-Rinse

¡

Cleaning 50 °C

¡

Intermediate rinse

¡

Final rinse 65 °C

¡

Drying

All

→ 

"Additional

functions",
Page 19

Express 65° - 1h

Tableware:

¡

Cleaning mixed table-
ware and cutlery.

Level of soiling:

¡

Removing common
household food remnants
lightly dried-on.

Time-optimised:

¡

Cleaning 65 °C

¡

Intermediate rinse

¡

Final rinse 69 °C

¡

Drying

Extra Rinse
ExtraDry

→ 

"Additional

functions",
Page 19

Machine Care

Only when using unloaded
appliance.

Machine Care 70 °C

None

Favourite

-

-

-

Note: 

The relatively long running time

in the Eco 50 ° programme is due to
longer soaking and drying times. This
results in optimal consumption val-
ues.

Information for test institutes

Test institutes are provided with in-
formation for comparability tests, e.g.
according to EN60436.
These are the conditions for conduct-
ing the tests, however they are not
the results or consumption values.
E-mail enquiries to: dishwasher@test-
appliances.com
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rat-
ing plate on the appliance door.

Favourite 

You can save a combination of a pro-
gramme and an additional function to
the   button.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermedi-
ate cleaning via cold rinsing.

Save Favourite

 on the appliance.

1.

Press  ⁠.

2.

Press the right programme button. 
→ 

"Programmes", Page 17

3.

Press the button for the relevant
additional function. 
→ 

"Additional functions", Page 19

4.

Press   for 3 seconds.

a

The selected programme and the
additional function will flash.

a

 flashes.

a

The programme and the additional
function are saved.

Summary of Contents for SRS4HMI3FR

























































Reviews: