en-us
Home Connect™
32
Activating remote start
If you have selected remote start
"rc1" with the basic setting, you
can activate the remote start func-
tion on your appliance.
Requirements
¡
The appliance is connected to
your WLAN home network.
¡
The appliance is connected to
the Home Connect™ app.
¡
With the basic setting Remote
, "rc1" is se-
lected.
¡
A program is selected.
▶
Press .
If you open the appliance door,
remote start is automatically
deactivated.
a
The remote start button
flashes.
Tip: To deactivate remote start,
press .
14.4 Remote Diagnostics
The Customer Service can access
your appliance via Remote Diag-
nostics if you ask them to do so, if
your appliance is connected to the
Home Connect™ server and if
Remote Diagnostics is available in
the country where you are using
the appliance.
Tip: Further information and de-
tails about the availability of Re-
mote Diagnostics in your country
can be found in the Service/Sup-
port section of your local website:
www.home-connect.com
14.5 Software update
You can use this function to up-
date the software of your appli-
ance, e.g. for optimization, trou-
bleshooting or safety-relevant up-
dates.
The Home Connect™ app informs
you about available software up-
dates.
14.6 Data Protection
Please see the information on
data protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the
following types of data to the
Home Connect™ server (initial
registration):
¡
Unique appliance identification
(consisting of appliance codes
as well as the MAC address of
the installed Wi-Fi communica-
tion module).
¡
Security certificate of the Wi-Fi
communication module (to en-
sure a secure data connection).
¡
The current software and hard-
ware version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares
the Home Connect™ functions for
use and is only required when you
want to use the Home Connect™
functions for the first time.
Note: Please note that the
Home Connect™ functions can be
utilized only with the Home Con-
nect™ app. Information on data
protection can be called up in the
Home Connect™ app.