en
Installation and connection
12
Sensor setting
Description
ing low levels of active
agents. Energy and water
consumption are adjusted
accordingly.
Efficient Dry
The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows
"00h:00m".
If the automatic door opening is de-
activated, energy consumption in-
creases and the drying phase is usu-
ally reduced.
→
"Additional functions", Page 19
Installation and connection
Installation and connec-
tion
Installation and connection
Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note:
The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡
Dishwasher
¡
Operating instructions
¡
Installation Instructions
¡
Warranty
¡
Installation material
¡
Steam guard plate
¡
Salt filling aid funnel
¡
Mains cable
¡
Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1.
"Follow the safety instructions."
→
2.
"Follow the instructions for elec-
trical connection." →
3.
Check the Scope of supply and
the condition of the appliance.
4.
Consult the installation instructions
for the installation dimensions re-
quired.
5.
Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6.
"Install the drainage connection."
→
7.
"Install the drinking water connec-
tion." →
8.
Connect the appliance to the
power supply.
