Technical data
NL
Check for defective supply lines or
fittings up to the AquaStop
connection on the tap.
†While using an appliance
In principle, with AquaStop you do
not have to keep up with it or. turn
off the tap after use for safety
reasons. The tap should only be
turned off when you are away for a
longer period of time, for example if
you are going on holiday for a few
weeks.
Recorded power
gene
Disabled access
standby/standby mode:
0.50 W
non-disabled
condition: 5 W
Networked
standby: 2.00 W
Duration of the non-
disarmed state:
10 minutes
Time after which the
machine is networked
unions goes standby
brought: 10 min
Complies with current
regulations (EU)
on energy labels
and ecologically de- veloped
cast at the time
of marketing.
Additional functions
and settings may
power consumption and the
time data increased
gene.
t
t
technical
data
technical data
Figures and facts about the device can be
found here.
Weight
Tension
Max.: 45 kg
220 - 240 V, 50 Hz or
60 Hz
Connection value
Fuse
2000 - 2400 W
10 - 16 A
water pressure
†min. 0.05 MPa
(0.5 bar)
†max. 1 MPa
(10 bar)
Quantity of indoor
running water
min. 10 l/min
Water temperature
Cold water.
Hot water max.:
60°C
Capacity
10 standard place settings
This product contains a light source of
energy class G. The light source is
available as a spare part and may only
be replaced by a trained technician.
Further information about your model
can be found on the Internet at
https://energylabel.bsh-group.com
1
Only applies to countries in the European Economic Area
63
