Bosch SPH4HMX31E, Information For Use

Page: 35 / 64

Basic settings
en
35
Basic settings
Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Display text Selection Description
Water hardness H04
1
H00 - H07 Set the water softening system to
your water hardness.
→
"Setting the water softening sys-
tem", Page 25
Level H00 switches the water soften-
ing system off.
Rinse aid dispensing r04
1
r00 - r06 Set the amount of rinse aid to be dis-
pensed.
→
"Setting the amount of rinse aid",
Page 27
Switch the rinse aid system off with
level r00.
Intensive drying d00
1
d00 - d01 The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Hot water A00
1
A00 - A01 Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A01" or off
"A00".
1
Factory setting (may vary according to model)