background image

Basic operation

 en

35

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.

Press the right programme button. 
→ 

"Programmes", Page 19

a

The programme is set and the pro-
gramme button flashes.

a

The remaining running time of the
programme appears on the dis-
play.

Setting additional functions

You can set additional functions to
complete the washing programme
selected.

Note: 

The additional functions which

can be used depend on the pro-
gramme selected. 
→ 

"Programmes", Page 19

Press the button for the relevant
additional function. 
→ 

"Additional functions", Page 21

a

The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.

1.

Press  ⁠   or  ⁠  ⁠.

a

"00h:01m" appears on the display.

2.

Use  ⁠   or  ⁠   to set the re-
quired start time for the pro-
gramme.

3.

Press 

⁠.

a

This activates time preselection.

Tip: 

To deactivate timer program-

ming, press  ⁠   or  ⁠   repeatedly
until "00h:00m" appears in the dis-
play.

Starting the programme

Press 

.

a

The programme has ended when
the display shows "00h:00m".

Notes

¡

If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.

¡

You can only change a pro-
gramme when running if you can-
cel it. 
→ 

"Terminate programme",

Page 36

¡

The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: 

When you open the appliance

door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.

1.

Open the appliance door carefully.

2.

Press  ⁠.

a

The programme is saved and the
appliance switches off.

3.

Press   to resume the pro-
gramme.

Summary of Contents for SMV6ZCX19E

































































Reviews: