en
Installation and connection
14
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note:
If you are replacing the appli-
ance, you must use a new water sup-
ply hose.
1.
Consult the installation instructions
supplied for the steps required
here.
2.
Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the "Technical data"
→
3.
When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
¡
Follow the "Safety instructions"
→
.
¡
Connect the appliance to alternat-
ing current only, in the range of
220 - 240 V and 50 Hz or 60 Hz.
¡
Please note that the water safety
system is only functional if there is
a power supply.
1.
Insert the non-heating appliance
plug of the power cable into the
appliance.
2.
Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3.
Check that the mains plug is inser-
ted properly.
Summary of Contents for SMV4HAX48E
Page 59: ......