background image

Technical specifications

 en

61

needs to be turned off if you are
away from home for a long period,
e.g. on holiday for several weeks.

Technical specifications

Technical specifications

Technical specifications

Facts and figures for your appliance
can be found here.

Weight

Max.: 60 kg

Voltage

220 - 240 V, 50 Hz or
60 Hz

Power rating

2000 - 2400 W

Fuse

10 - 16 A

Power consumption

Off mode/standby
mode: 0.50 W
Left-on mode: 0.50 W
Networked standby:
2.00 W
Time in left-on mode:
0 min
Time after which ap-
pliance is switched to
networked standby
mode: 10 min
Complies with the
latest regulations (EU)
for energy labels and
ecodesign at the time
of placing on the mar-
ket.
Additional functions
and settings may in-
crease power con-
sumption and times.

Water pressure

¡

Min. 0.05 MPa
(0.5 bar)

¡

Max. 1 MPa
(10 bar)

Inlet rate

Min. 10 l/min

Water temperature

Cold water.
Hot water max.: 60 °C

Capacity

13 place settings

More information about your model
can be found online at https://en-
ergylabel.bsh-group.com

1

. This web

address is linked to the official EU
EPREL product database. At the time
of printing its web address had not
yet been published. Please then fol-
low the instructions on searching for
models. The model identifier is made
up of the characters before the slash
in the product number (E-Nr.) on the
rating plate. Alternatively you can
also find the model identifier in the
first line of the EU energy label.

Information regarding Free
and Open Source Software

This product includes software com-
ponents that are licensed by the
copyright holders as free software or
open source software.
The applicable licence information is
stored on your home appliance. You
can also access the applicable li-
cence information via your Home
Connect App: "Profile -> Legal inform-
ation -> Licence Information". You
can download the licence information
on the brand product website (search
for your appliance model on the
product website and check additional
documents). Alternatively, you can
send a request to oss-
[email protected] or to BSH Haus-
geräte GmbH GmbH, Carl-Wery-Str.
34, D-81739 München, Germany.
The source code will be made avail-
able to you on request.
To file a request, please email to oss-
[email protected] or send a written
request to BSH Hausgeräte GmbH,
Carl-Wery-Str. 34, D-81739 München,
Germany.

1

Only applies to countries in the European Economic Area

Summary of Contents for SMV4EDX17E

































































Reviews: