Bosch SMV2ITX16G, Information For Use

Page: 34 / 60

en
Basic settings
34
Setting Extra Dry
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
is flashing on the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
LEDs show the right value.
If "LED A" →
Page 15 is not lit, Ex-
tra Dry is switched off.
If "LED A" →
Page 15 is lit, Extra
Dry is switched on.
5.
To save the settings, press
for 3 seconds.
Set Wi-Fi
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
is flashing on the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
LEDs show the right value.
If "LED A" →
Page 15 is not lit, the
wireless network connection is
switched off.
If "LED A" →
Page 15 is lit, the
wireless network connection is
switched on.
5.
To save the settings, press
for 3 seconds.
Activating Remote Start
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
is flashing on the display.
3.
Press repeatedly until
flashes on the display.
4.
Press repeatedly until the
LEDs show the right value.
If LED A lights up, the function is
permanently deactivated.
If LED A and LED B light up, the
function can be selected using the
button.
If LED A, LED B and LED C light
up, the function is permanently ac-
tivated.
The factory setting is level 2 ("LED
A and LED B" →
Page 15 ).
5.
To save the settings, press
for 3 seconds.
Setting signal volume
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
is flashing on the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 ("LED
A and LED B" →
Page 15 ).
5.
To save the settings, press
for 3 seconds.
Restoring factory settings
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a is flashing on the display.
3.
Press repeatedly until ,
and flash in the display.
4.
Press to set the appliance
back to the factory settings.
a The appliance is reset.