Bosch SMS8ZDI48M, User Manual

Page: 35 / 64

Basic operation
en
35
Switching on the appliance
▶
Press ⁠.
The Eco 50° programme is set by
default.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
▶
Press the right programme button.
→
"Programmes", Page 19
a
The programme is set and the pro-
gramme button flashes.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:
The additional functions which
can be used depend on the pro-
gramme selected.
→
"Programmes", Page 19
▶
Press the button for the relevant
additional function.
→
"Additional functions", Page 21
a The additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24 hours.
1.
Press ⁠.
2.
Press or repeatedly until the
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h 25min) or "Finish at" (e.g.
15:20 hours). You can change this
setting in the "Basic settings"
→
Page 37 .
3.
To activate timer programming,
press
⁠.
Note:
To deactivate timer program-
ming, press for approx.
4 seconds.
Starting the programme
▶
Press .
a
The programme has ended when
the display shows "Finished".
Notes
¡
If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡
You can only change a pro-
gramme when running if you can-
cel it.
→
"Terminate programme",
Page 36
¡
The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1.
Press ⁠.
a
The programme is saved and the
appliance switches off.