background image

Detergent

 en

27

5.

To save the settings, press

 for 3 seconds.

Switching the rinse aid sys-
tem off

If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.

Tip: 

The function of rinse aid is lim-

ited with combined detergents. You
will generally get better results using
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows Hxx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r05.

4.

Press 

 repeatedly until the dis-

play shows r00.

5.

To save the settings, press

 for 3 seconds.

a

The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.

Detergent

Detergent

Detergent

Find out which detergents are suit-
able for your appliance.

Suitable detergents

Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
"Special salt" → 

Page 24

 and "Rinse

aid" → 

Page 26

 separately.

Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
starch and remove protein. Oxygen-
based bleaching agents are generally
used to remove coloured marks, e.g.
tea or ketchup.

Note: 

Follow the manufacturer's in-

structions for each detergent.

Detergent

Description

Tabs

Tabs are suitable for all
cleaning functions and do
not need to be measured
out.
With shorter "Pro-
grammes" 

→ 

Page 17

 tabs

sometimes do not dissolve
entirely and leave residues
of detergent. This may im-
pair the cleaning effect.

Powder deter-
gent

Powder detergent is re-
commended for shorter
"Programmes" 

→ 

Page 17

.

The dosage can be adjus-
ted to the level of soiling.

Liquid detergent

Liquid detergent works
faster and is recommen-
ded for shorter "Pro-
grammes" 

→ 

Page 17

without PreRinse.
Sometimes liquid deter-
gent may leak out despite
the detergent dispenser
being closed. This is not a
fault and is non-critical if
you remember the follow-
ing:

¡

Only choose a pro-
gramme without PreR-
inse.

¡

Do not select timer pro-
gramming for starting
the programme.

The dosage can be adjus-
ted to the level of soiling.

Summary of Contents for SMS6ZCI00G





























































Reviews: