background image

Cleaning and servicing

 en

37

Declaration of Conformity

Robert Bosch Hausgeräte GmbH
hereby declares that the appliance
with Home Connect functionality
meets the essential requirements and
other relevant provisions of the Dir-
ective 2014/53/EU.
A detailed RED Declaration of Con-
formity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.

2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.

BE

BG

CZ

DK

DE

EE

IE

EL

ES

FR

HR

IT

CY

LV

LT

LU

HU

MT

NL

AT

PL

PT

RO

SI

SK

FI

SE

UK

NO

CH

TR

5 GHz WLAN (Wi-Fi): For indoor use only.

Cleaning and servicing

Cleaning and servicing

Cleaning and servicing

To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.

Cleaning the tub

WARNING

Risk of harm to health!

Using detergents containing chlorine
may result in harm to health.

Never use detergents containing
chlorine.

1.

Remove any coarse soiling in the
interior with a damp cloth.

2.

Add detergent to the detergent dis-
penser.

3.

Select the programme with the
highest temperature.
→ 

"Programmes", Page 17

4.

"Start the programme without
tableware." → 

Page 31

Cleaning products

Only use suitable cleaning products
to clean your appliance.
→ 

"Safe use", Page 10

Tips on appliance care

Follow the tips on appliance care to
make sure your appliance functions
properly at all times.

Action

Benefit

Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.

This ensures the parts
of the appliance will
remain clean and hy-
gienic.

If the appliance is not
going to be used for a
while, leave the door
slightly ajar.

This will prevent un-
pleasant odours.

Summary of Contents for SMS4EVI14E





























































Reviews: