background image

Safety

 en

7

WARNING ‒ Risk of tipping!

Overfilling the Baskets may cause the appliance to tip up.

Never overfill the Baskets with free-standing appliances.

WARNING ‒ Risk of electric shock!

¡

An ingress of moisture can cause an electric shock.

Only use the appliance in enclosed spaces.

Never expose the appliance to intense heat or humidity.

Do not use steam- or high-pressure cleaners to clean the
appliance.

¡

If the insulation of the power cord is damaged, this is danger-
ous.

Never let the power cord come into contact with hot appli-
ance parts or heat sources.

Never let the power cord come into contact with sharp
points or edges.

Never kink, crush or modify the power cord.

Damaged appliance

WARNING ‒ Risk of electric shock!

¡

If the appliance or the power cord is damaged, this is danger-
ous.

Never operate a damaged appliance.

Never operate an appliance with a cracked or fractured sur-
face.

Never pull on the power cord to unplug the appliance. Al-
ways unplug the appliance at the mains.

If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box
and turn off the water tap.

"Call customer services." → 

Page 56

¡

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by
trained specialist staff.

Only use genuine spare parts when repairing the appliance.

Summary of Contents for SMS4ETI14E





























































Reviews: