background image

Safety

 en

5

Safe installation

Follow these safety instructions when installing the appliance.

WARNING ‒ Risk of injury!

Improper installation may cause injury.

When installing and connecting the appliance, follow the in-
structions in the manual and installation instructions.

WARNING ‒ Risk of electric shock!

Improper installation is dangerous.

Connect and operate the appliance only in accordance with
the specifications on the rating plate.

Connect the appliance to a power supply with alternating
current only via a properly installed socket with earthing.

The protective conductor system of the domestic electrical
installation must be properly installed.

Never equip the appliance with an external switching
device, e.g. a timer or remote control.

When the appliance is installed, the mains plug of the
power cord must be freely accessible. If free access is not
possible, an all-pole isolating switch must be installed in the
permanent electrical installation according to the installation
regulations.

When installing the appliance, check that the power cable is
not trapped or damaged.

WARNING ‒ Risk of fire!

It is dangerous to use an extended power cord and non-ap-
proved adapters.

Do not use extension cables or multiple socket strips.

If the power cord is too short, contact Customer Service.

Only use adapters approved by the manufacturer.

Summary of Contents for SMS2HKW66G

























































Reviews: