Home Connect
NL
Basic setting
Factory setting
Choice
Reset
Description
Reset changed settings to factory
condition.
Initial commissioning settings must
be specified.
1
Factory setting (may differ depending on the device type)
Change basic settings
huh
huh
uncle Connect
uncle Connect
1.
Press.
huh
d
uncle Connect
this device is network capable.
Connect your appliance to a mobile
terminal device to be able to operate
functions via the Home Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com. In
order to use Home Connect, you must
first establish a connection to the
WLAN home network (Wi-Fi
1
) and can
be configured with the Home Connect
app.
†
†Device with WLAN home network
connect work (wifi)", page 42 The
Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
2.
Approx. Press for 3 seconds to access
the basic settings.
3.
Press repeatedly until the display
shows the desired setting.
4.
Press or repeatedly until the display
shows the desired value.
You can change multiple settings.
5.
To save the settings, press . for
about 3 seconds
to press.
Setting time
1.
Approx. 3 seconds on
to open the basic settings.
to press
2.
Press repeatedly until the display
reads "Time setting".
3.
Press or repeatedly until the display
shows the desired time.
Through
hold, the setting values change in
10-minute increments.
and
longer pressed to
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
4.
To save the settings, press for
approx. 3 seconds.
Remark:Observe the safety
instructions in this manual and make
sure that they are also observed when
using the appliance.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
41
Summary of Contents for SMI8ZCS02E
Page 67: ......