Bosch SMI8ZCS02E, User Manual

Page: 28 / 68

NLSoftening System
1. "
Fill with softening salt."
→ Page 29
6.
To save the settings, press for
approx. 3 seconds.
2. "
Fill with rinse aid."
→ Page 31
7.
The "filling detergent"
→ Page 32†
3.
Switch on the device.
8.
Start the program with the highest
cleaning temperature without
crockery.
aThe display shows the settings
before first use.
4.
Press repeatedly until the display
shows the desired setting.
We recommend that you use the
appliance without any crockery
before using it for the first time due
to possible water stains and other
residues.
Remark:If you select Home Connect
in the initial start-up setting, you can
make further settings via the Home
Connect app of your mobile
terminal device.
The settings for initial
commissioning and further "basic
settings" →
Page 39you can change
it at any time on the device or via
the Home Connect app of your
mobile terminal device.
O
Softening System
hardening system
O
Hard, calcareous water leaves
limescale residues on the dishes and
the rinse aid container and can clog
parts of the appliance. For good
washing results, you can soften water
with the water softener and softening
salt. To prevent damage to the device,
water with a hardness of more than 7
°dH must be softened.
hardening system
5.
Press or repeatedly until the display
shows the desired value.
You can change multiple settings.
Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can request the water hardness from your local water company or determine it
with a water hardness tester.
Water hardness °dH
0 - 6
7 - 8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
Hardness Range
soft
soft
average
average
average
hard
hard
hard
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
Set value
0 - 6
7 - 8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
28