Bosch SMI88TS01W Instruction Manual Download Page 52

Page: 52 / 54

Installation and connection

Electrical connection

■

Connect the appliance to an

alternating current only, ranging from

220 V to 240 V and 50 Hz or 60 Hz

via a correctly installed socket with

protective earth conductor. See

rating plate for required fusing

■

The socket must be near the

appliance and freely accessible

following installation.

If the plug is not freely accessible, an

allpole disconnector with a contact

opening of at least 3 mm must be

fitted on the installation side to

satisfy the relevant safety

instructions.

■

The connection may be modified

by technicians only.

■

A power cord extension may be

purchased from customer service

only.

■

Use only a residual current operated

circuit-breaker which features the

symbol

‚

. Only this extension

guarantees compliance with

the currently valid regulations.

■

The appliance features a water

damage protection system. Please

note the system will function

only

when the power supply

is connected.

Removal

Also observe

the sequence of worksteps here.

Disconnect the appliance from the

power supply.

Turn off the tap.

Undo the waste water and drinking

water connection.

Loosen fastening screws for the

furniture parts.

If fitted, remove the base panel.

Pull out the appliance, carefully

pulling the hose behind.

Summary of Contents for SMI88TS01W























































Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands

Bosch SMI88TS01W, Instruction Manual

Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands