Bosch SMI88TS01W, Instruction Manual

Page: 13 / 54

Getting to know your appliance
en
13
Switching on the appliance for the first time
When the dishwasher is switched on for
the first time, you are taken directly to
the settings for switching on the
appliance for the first time. The following
text is indicated on the display window
at the top
@
:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
The required settings for switching on
the appliance for the first time are listed
in the table below.
Change the setting as follows:
1.
Keep pressing button
>
)*
until the
required setting is displayed.
2.
Make the setting with setting buttons
+ -
X
.
3.
Press and hold the Info button
{
8
for 3 seconds.
The chosen setting has now been
stored.
--------
Settings
Switching on the
appliance for the first
time
Factory setting Infotext
by pressing Info button
{
Language Deutsch Language selection.
Time format 24h 12h or 24h.
Time setting 12:00 Set the current time.
Water hardness °E 16 - 20 medium Setting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp. Setting 5 Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Water connection * Cold water Connection to hot water (40-60°C) or cold
water (<40°C) possible.
* depending on the features of your dishwasher