Bosch SMI4HTS01A, User Manual

Page: 35 / 60

Basic settings
aus
35
Basic setting Display text Selection Description
Wi-Fi Cn0 Cn0 - Cn1 Switch the wireless network
connection on or off.
Level "Cn0" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
Home Connect app.
→
"Home Connect ",
Page 36
Remote Start rc1 rc0 - rc2 Activate or deactivate
→
"Remote Start ",
Page 37 .
The following settings are
possible:
¡
With the setting "rc0", the
function is permanently
deactivated.
¡
With the setting "rc1", the
function can be selected
via the
button.
→ "Activating Remote
Start ", Page 37
¡
With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→
"Home Connect ",
Page 36
Factory setting rE Start with
YES
Confirm with Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
1.
Press ⁠.
2.
To open the basic settings, press
for 3 seconds.
a The display shows ⁠.
3.
Press repeatedly until
the display shows the required set-
ting.
4.
Press repeatedly until the dis-
play shows the right value.
You can change several settings.