en-us
Rinse Aid
16
Switching off low salt
indicator / water softening
system
Switching
off wate
r softeni
ng system
If the use of combined detergents
with a salt component impairs the
low salt indicator
P
on the control
panel or the text on the display
window at the top
@
(enough salt
for x rinse cycles), the displays can
be switched off.
Proceed as described under “Setting
water softening system” and set the
value to
0-8
. The water softening
system and salt refill indicator
are now switched off.
,
Rinse Aid
Rinse Aid
To achieve proper drying, always use
a liquid rinse aid, even if your
detergent contains a rinse aid or
drying additive.
Note:
The dishwasher indicates low
rinse aid by turning on the Rinse Aid
indicator on the display
@
. If this
indicator lights up, you need to refill
the rinse aid dispenser
9*
by
following the directions below.
Adding rinse aid
NOTICE
To avoid oversudsing or clogging, do
not overfill the rinse aid
dispenser
9*
. Wipe up any spills
with a damp cloth.
1.
Open the rinse aid dispenser
9*
by pressing on the latch of the lid
and pull it open.
Summary of Contents for SHV89PW53N
