Bosch SHV78B73UC, Use And Care Manual

Page: 17 / 64

Options
en-us
17
5.1 Energy Guide
The Energy Guide label was
based on the Normal soil sensing
cycle.
The unit was tested without any
rinse aid (liquid) in the rinse aid
dispenser. A single dose of deter-
gent was inserted into the deter-
gent dispenser, with no detergent
being used in the prewash. The
unit was not subjected to trun-
cated testing per the definitions in
the test procedure. We recom-
mend that dish loads such as the
one in the energy certification test
have the rack position set in the
highest position. Recommended
for daily, regular or typical use to
completely wash a full load of nor-
mally soiled dishes.
5.2 Favorite
With this function, you can save a
combination of a Cycle and an
Option.
You can save the selected Cycle
and Option combination via the
Home Connect app or on the ap-
pliance.
The pre-rinse cycle is pre-pro-
grammed to this button and is fine
for all types of dishware. The dish-
ware is rinsed with cold water.
Tip: You can use the Home Con-
nect app to download additional
Cycles and Options and save
them. 1
Save Favorite on the
appliance.
1.
Open the appliance door.
2.
Press ⁠.
3.
Press the right cycle button.
4.
Press the button for the rele-
vant options.
5.
Press Favorite button for 3 sec-
onds.
a
The selected cycle and option
will flash.
a
The Favorite button flashes.
a
The program combination is
saved.
Tip: To reset the cycle, either use
the Home Connect app or reset
your appliance back to the factory
settings.
→
"Overview of the basic set-
tings", Page 33
Options
6 Options
Options
Here is an overview of the differ-
ent options available on your dish-
washer.
Option Use
Crystal
Dry
Patented technology
thoroughly dries
dishes and plastics
such as baby bottles
and food storage
containers. Natural
minerals transform
moisture into heat
up to 176F/80C to
get dishes, even
plastics, 60% drier.
Extends drying time.
Half Load
¡
Switch on with
small loads.
¡
It is recom-
mended adding
less detergent to
the detergent dis-
penser than for a
full machine load.
¡
The run time is
shortened.
¡
Energy and water
consumption are
reduced.
1 Depending on the appliance specifications