en-us
Care and Maintenance
36
Spray arms
Check spray arms
12
,
1J
for
grease and limescale deposits. If you
find such deposits:
■
Fill detergent dispenser
9*
with
detergent and start the appliance
without utensils in the cycle with
the highest rinsing temperature.
■
Clean the appliance with
detergents/appliance cleaners
which are particularly suitable for
use with dishwashers.
■
Unscrew the upper spray arm
12
and pull off the lower spray
1J
arm as shown. Inspect for
deposits.
Drain pump
Large food remnants in the rinsing
water not retained by the filters may
block the waste water pump. In this
case:
■
Disconnect the appliance from the
power supply.
■
Remove the filters.
■
Scoop out standing water - use a
sponge if necessary.
■
Using a spoon, pry off the pump
cover until it clicks, then grip the
cover and pull upward until it
resists and then pull forward.
■
Check inner compartment and
remove any foreign objects.
9
WARNING
Use caution when removing
parts for cleaning as some
debris may be sharp.
■
Place cover in the original
position, press down and engage.
■
Reinstall filters.
Note:
The drain pump will not work
properly if the drain pump cover is
not snapped in completely until it
clicks.
&OLFN
Summary of Contents for SHP53T55UC
Page 2: ...2 ...
Page 10: ...en us Getting Started 10 Getting Started GettingStarted Appliance overview ...
Page 95: ......