en-us
Troubleshooting
46
3
Troubleshooting
Troubleshooting
Dishwashers may occasionally
exhibit problems that are unrelated to
a malfunction of the dishwasher itself.
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Fault
Cause
Remedial action
Error code
“
:
‚‰
is lit.
Supply hose kinked.
Install supply hose without kinks.
Water supply turned off.
Turn on the water supply.
Water supply jammed or calcified.
Turn on the water supply.
Flow rate must be min. 10 l/min. when
water supply is open.
Filter in the water supply blocked.
Switch off the dishwasher and pull out the
power supply plug. Turn off the tap.
Unscrew water connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
dishwasher.
Error code
“
:
‹ˆ
is lit.
Intake opening (on right inside of
dishwasher) covered by dishes.
Arrange dishes so that the intake opening is
not obstructed.
Error code
“
:
‚ƒ
is lit.
Heating element calcified or soiled. Clean dishwasher with a dishwasher clean-
ing agent or descaler. Operate the dish-
washer with water softening system and
check the setting.
Error code
“
:
ƒƒ
is lit.
Filters
1b
are soiled or blocked.
Clean filters.
Error code
“
:
ƒ…
is lit.
Waste-water hose kinked or
blocked.
Install hose without kinks, remove any resi-
due.
Siphon connection still sealed.
Check connection to siphon and open if
required.
Cover on the drain pump loose.
Lock cover correctly.
* This is an optional feature which may or may not be included with your dishwasher.
Summary of Contents for SHE89PW75N
Page 2: ...2 ...