en-us
Home Connect
16
o
Home Connect
Home Connect
This dishwasher is Wi-Fi capable and
can be remotely controlled via a
mobile device.
If your dishwasher does not connect
to the home network, you can also
operate the dishwasher manually by
pressing the buttons.
Refer to appliance overview for the
location of the buttons.
"Appliance overview" on page 12
Info button
Info button
The Info button
8
can be used to
display additional wash cycle
information.
1.
Press the Info button
8
.
2.
Press the wash cycle button.
Information on the selected wash
cycle is indicated on the display
window at the top
@
.
3.
To leave, press Info button
8
.
Setting up the app
To be able to operate the appliance
via Home Connect, the Home
Connect app must be installed on
your mobile device.
Observe the supplied Home Connect
documents with regard to this.
Follow the steps specified by the app
to implement the settings.
Setting up Home Connect
You can set your dishwasher by
pressing the remote start button
h
or proceed as follows:
1.
Open the door.
2.
Switch on the On/Off switch
(
.
3.
Press Info button
8
for
3 seconds until the following text
is indicated on the display window
at the top
@
:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
4.
Keep pressing button
>
`
until
the required setting is indicated
on the display window at the top
@
.
5.
Make the setting with setting
buttons
+ -
X
. See table in
6.
Press and hold the Info button
8
for 3 seconds.
The chosen setting has now been
stored.
Wi-Fi
|
Wi-Fi
In the Wi-Fi menu you can activate
the wireless network connection with
“on” and deactivate it with “off”.
Notes
■
If you have selected the Wi-Fi “off”
setting, the “Network login” and
“Connect to App” settings are not
available.
■
Remote control of the appliance
requires a stable wireless network
connection.
Network login
The “Network login” menu option is
not available unless you have
activated Wi-Fi.
In the “Network login” menu you can
select between “Autom./WPS” and
“Manual” to connect the dishwasher
to your home network.
Automatic:
Connect to the home
network using the WPS function of
your router.
:L)L
!
RQ
0DQXDO
1HWZRUNORJLQ
!
$XWRP:36
