background image

en 

Safety

8

Never kink, crush or modify the power cord.

Damaged appliance

WARNING ‒ Risk of electric shock!

¡

If the appliance or the power cord is damaged, this is danger-
ous.

Never operate a damaged appliance.

Never operate an appliance with a cracked or fractured sur-
face.

Never pull on the power cord to unplug the appliance. Al-
ways unplug the appliance at the mains.

If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box
and turn off the water tap.

"Call customer services." → 

Page 53

¡

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by
trained specialist staff.

Only use genuine spare parts when repairing the appliance.

If the power cord of this appliance is damaged, it must be
replaced with a special connection cable, which is available
from the manufacturer or his Customer Service.

Risk to children

WARNING ‒ Risk of suffocation!

¡

Children may put packaging material over their heads or wrap
themselves up in it and suffocate.

Keep packaging material away from children.

Do not let children play with packaging material.

¡

Children may breathe in or swallow small parts, causing them
to suffocate.

Keep small parts away from children.

Do not let children play with small parts.

¡

Children may become trapped in the appliance and suffocate.

Use the childproof lock if fitted.

Never let children play with or operate the appliance.

Summary of Contents for SGV4HCX40G

























































Reviews: