background image

en 

Detergent

26

4.

Close the lid of the dispenser for
rinse aid.

a

The lid clicks into position.

Setting the amount of rinse
aid

If there are streaks or water marks on
tableware, change the amount of
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows Hxx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r05.

4.

Press 

 repeatedly until the

right amount of rinse aid has been
set.
– A low setting adds less rinse aid

during the wash cycle and re-
duces streaking on tableware.

– A higher setting adds more

rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.

5.

To save the settings, press

 for 3 seconds.

Switching the rinse aid sys-
tem off

If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.

Tip: 

The function of rinse aid is lim-

ited with combined detergents. You
will generally get better results using
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows Hxx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r05.

4.

Press 

 repeatedly until the dis-

play shows r00.

5.

To save the settings, press

 for 3 seconds.

a

The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.

Detergent

Detergent

Detergent

Suitable detergents

Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
"Special salt" → 

Page 23

 and "Rinse

aid" → 

Page 25

 separately.

Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
starch and remove protein. Oxygen-
based bleaching agents are generally
used to remove coloured marks, e.g.
tea or ketchup.

Note: 

Follow the manufacturer's in-

structions for each detergent.

Detergent

Description

Tabs

Tabs are suitable for all
cleaning functions and do
not need to be measured
out.
With shorter "Pro-
grammes" 

→ 

Page 17

 tabs

sometimes do not dissolve
entirely and leave residues
of detergent. This may im-
pair the cleaning effect.

Summary of Contents for SGV4HAX40E

























































Reviews: