background image

Basic operation

 en

31

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.

Press the right programme button. 
→ 

"Programmes", Page 17

a

The programme is set and the pro-
gramme button flashes.

a

The remaining running time of the
programme appears on the dis-
play.

Setting additional functions

You can set additional functions to
complete the washing programme
selected.

Note: 

The additional functions which

can be used depend on the pro-
gramme selected. 
→ 

"Programmes", Page 17

Press the button for the relevant
additional function. 
→ 

"Additional functions", Page 19

a

The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.

1.

Press  ⁠.

a

"h:01" appears in the display.

2.

Use   to set the required start
time for the programme.

3.

Press 

⁠.

a

This activates timer programming.

Tip: 

To deactivate timer program-

ming, press   repeatedly until "h:00"
appears in the display.

Starting the programme

Press 

.

a

The programme has ended when
the display shows "0h:00m".

Notes

¡

If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.

¡

You can only change a pro-
gramme when running if you can-
cel it. 
→ 

"Terminate programme",

Page 32

¡

The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Activating button lock

The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.

Press 

 for approx. 3 seconds.

a

The button lock is activated and
will be automatically deactivated at
the end of the programme.

a

When the appliance is operated,

 flashes on the display.

a

The button lock remains activated
with a power failure.

Deactivate button lock

Press 

 for approx. 3 seconds.

Interrupting programme

Note: 

When you open the appliance

door once the appliance has heated
up, leave the door slightly ajar for a

Summary of Contents for SGS4HVI33E

























































Reviews: