background image

Technical specifications

 en

53

least 10 years from the date on
which your appliance was placed on
the market within the European Eco-
nomic Area.

Note: 

Under the terms of the manu-

facturer's warranty the use of Cus-
tomer Service is free of charge.
Detailed information on the warranty
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of
your appliance.
The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.

Product number (E-Nr.), pro-
duction number (FD) and con-
secutive numbering (Z-Nr.)

You can find the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
The rating plate is located inside the
appliance door.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.

Technical specifications

Technical specifications

Technical specifications

Weight

Max.: 60 kg

Voltage

220 - 240 V, 50 Hz or
60 Hz

Power rating

2000 - 2400 W

Fuse

10 - 16 A

Water pressure

¡

Min. 0.05 MPa
(0.5 bar)

¡

Max. 1 MPa
(10 bar)

Inlet rate

Min. 10 l/min

Water temperature

Cold water.
Hot water max.: 60 °C

Capacity

14 place settings

You can find more information about
your model online at https://
eprel.ec.europa.eu/

1

. This web ad-

dress is linked to the official EU
EPREL product database. Please
then follow the instructions on
searching for models. The model
identifier is made up of the charac-
ters before the slash in the product
number (E-Nr.) on the rating plate. Al-
ternatively, you can also find the
model identifier in the first line of the
EU energy label.

Information regarding Free
and Open Source Software

This product includes software com-
ponents that are licensed by the
copyright holders as free or open
source software.
The applicable licence information is
stored on your home appliance. You
can also access the applicable li-
cence information via your Home
Connect app: "Profile -> Legal inform-
ation -> Licence Information".

2

 You

can download the licence information
on the brand product website.
(Please search on the product web-

1

Only applies to countries in the European Economic Area

2

Depending on the appliance specifications

Summary of Contents for SGS4HCI40G

























































Reviews: