Bosch SGS2HVI66G, User Manual

Page: 23 / 56

Before using for the first time
en
23
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement: "The appliance has
been installed and connected."
→
Page 11
1.
"Add special salt." → Page 24
2.
"Add rinse aid." → Page 26
3.
"Switch on the appliance."
→
Page 31
4.
"Setting the water softening sys-
tem." →
Page 24
5.
"Set the amount of rinse aid to be
dispensed." →
Page 26
6.
"Add detergent" → Page 27 .
7.
Start the Programme with the
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip:
You can change these settings
and other "Basic settings"
→
Page 34 at any time.
Water softening system
Water softening system
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 Soft 0 - 1.1 H00
9 - 10 Soft 1.2 - 1.4 H01
11 - 12 Medium 1.5 - 1.8 H02
13 - 15 Medium 1.9 - 2.1 H03
16 - 20 Medium 2.2 - 2.9 H04
21 - 26 Hard 3.0 - 3.7 H05
27 - 38 Hard 3.8 - 5.4 H06
39 - 62 Hard 5.5 - 8.9 H07