Cleaning and maintenance NL
5.
Clean the sieve elements under
running water.
2.
Pull the lower spray arm upwards.
Carefully clean the dirt edge
between the coarse and fine sieve.
6.
Assemble the screening system.
Check whether the locking lugs of
the coarse sieve are engaged.
7.
Insert the sieve system into the
device and turn the coarse sieve
clockwise.
Check that the arrow marks are
opposite each other.
3.
Check the nozzles of the spray arms
for blockages under running water
and remove any foreign objects.
Cleaning spray arms
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
4.
Install the lower spray arm.
a The spray arm audibly clicks into place.
1.
Unscrew the upper spray arm and
pull it downwards
.
5.
Fit and screw on the upper spray
arm.
1
2
37
Summary of Contents for SGS2HTI79E
Page 55: ......
