manualshive.com logo in svg

Bosch Servodyn-D Series, Manual, Page: 18 / 84

Share
Download
Bosch Servodyn-D Series Manual Download Page 18

Prerequisites for commissioning

2–5

1070 066 091-102 (01.08) GB

2.3

Establishing communication between the drive and DSS

Connection between PC and drive

L

To avoid communication faults between the PC and the drive, please note

the following:

D

We recommend using the pre-assembled Bosch connection cable, part

no.: 1070 077 753, length 5 m

D

Distance between connection cable – power cables: min. 20 cm

D

Do not permit inductive or capacitive coupling with live components.

.

If communication faults still occur, an annular core on the connection

lead may be helpful. Use the folding ferrite coil, part no. 1070 918 766.

L

Connect COM1 or COM2 of the PC to X99 of the first inverter and record the

PC port used.

.

For pin assignments and wiring of the RS232 interface X99, please re-

fer to the annex on page A–1 ff.

Configuring the interface (DSS)

L

Switch on the 24V supply of the system.

If display H1 of the inverter does not show any of the values ”0”, ”2”, or ”4”,

check the system as described in section 2.1.

L

Switch on the PC. Wait until the operating system has been fully booted and

start the ”DSS” diagnostics and service system. The ”Establish connection”

dialog is automatically displayed:

(1)

(2)

(3)

This dialog may also be invoked manually when the connection has been

successfully established:

D

menu sequence EXTRAS 

"

 INTERFACE SELECT – or –

D

Click on 

 command button in the DSS ”Overview” window and 

select INTERFACE SELECT menu item.

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Servodyn-D Series





















































































Reviews:

No comments